GP10A THRU GP10M
SINTERED GLASS JUNCTION
PLASTIC RECTIFIER
VOLTAGE:50 TO 1000V
CURRENT: 1.0A
DO-41\DO-204AL
FEATURE
High temperature metallurgically bonded construction
Sintered glass cavity free junction
Capability of meeting environmental standard of
MIL-S-19500
High temperature soldering guaranteed
350°C /10sec/0.375”lead length at 5 lbs tension
Operate at Ta =55°C with no thermal run away
Typical Ir<0.1µA
MECHANICAL DATA
Terminal: Plated axial leads solderable per
MIL-STD 202E, method 208C
Case: Molded with UL-94 Class V-0 recognized Flame
Retardant Epoxy
Polarity: color band denotes cathode
Mounting position: any
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
(single-phase, half -wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated,
for capacitive load, derate current by 20%)
GP
GP
GP
10D
GP
10G
GP
10J
GP
10K
GP
10M
SYMBOL
units
10A
10B
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Vrrm
Vrms
Vdc
50
35
50
100
70
200
140
200
400
280
400
600
420
600
800
560
800
1000
700
V
V
V
Maximum DC blocking Voltage
Maximum Average Forward Rectified
100
1000
If(av)
1.0
A
A
V
Current 3/8”lead length at Ta =75°C
Peak Forward Surge Current 8.3ms single
half sine-wave superimposed on rated load
Maximum Instantaneous Forward Voltage at
1.0A
Ifsm
Vf
30.0
1.1
8.0
1.2
7.0
Maximum full load reverse current full cycle
Ir(av)
Ir
30.0
µ
A
Average at 75°C
5.0
µ
µ
µ
A
A
S
Maximum DC Reverse Current
at rated DC blocking voltage
Typical Reverse Recovery Time
Ta =25°C
Ta =125°C
(Note 1)
50.0
Trr
Cj
2.0
Typical Junction Capacitance
Typical Thermal Resistance
(Note 2)
(Note 3)
PF
°C /W
°C
R(ja)
Tstg, Tj
55.0
Storage and Operating Junction Temperature
-65 to +175
Note:
1. Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A
2. Measured at 1.0 MHz and applied reverse voltage of 4.0Vdc
3. Thermal Resistance from Junction to Ambient at 3/8”lead length, P.C. Board Mounted
Rev.A4
www.gulfsemi.com