1N4007-E
GENERAL PURPOSE
PLASTIC RECTIFIER
VOLTAGE: 1000V
CURRENT: 1.0A
DO-41\DO-204AL
FEATURE
Molded case feature for auto insertion
High current capability
Low leakage current
High surge capability
High temperature soldering guaranteed
250°C/10sec/0.375”lead length at 5 lbs tension
Halogen Free
MECHANICAL DATA
Terminal: Plated axial leads solderable per
MIL-STD 202E, method 208C
Case: Molded with UL-94 Class V-0 recognized Halogen
Free Epoxy
Polarity: color band denotes cathode
Mounting position: any
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
(single-phase, half -wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated,
for capacitive load, derate current by 20%)
SYMBOL
1N4007-E
units
*
*
*
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Vrrm
Vrms
Vdc
1000
700
V
V
V
Maximum DC blocking Voltage
1000
Maximum Average Forward Rectified Current
3/8”lead length at Ta =75°C
Peak Forward Surge Current 8.3ms single Half
sine-wave superimposed on rated load
Maximum Instantaneous Forward Voltage at
rated forward current
*
*
*
If(av)
Ifsm
Vf
1.0
30.0
1.1
A
A
V
Maximum full load reverse current
full cycle at TL =75°C
Ir(av)
30.0
µA
5.0
50.0
Maximum DC Reverse Current
at rated DC blocking voltage
Ta =25°C
Ta =100°C
Ir
µA
Typical Junction Capacitance
Typical Thermal Resistance
(Note 1)
(Note 2)
Cj
15.0
pF
°C /W
°C
Rth(ja)
Tj, Tstg
50.0
Storage and Operation Junction Temperature
-50 to +150
Note:
1. Measured at 1.0 MHz and applied voltage of 4.0Vdc
2. Thermal Resistance from Junction to Ambient at 0.375”lead length, P.C. Board Mounted
* JEDEC Registered value
Rev.A1
www.gulfsemi.com
GULFSEMI [ GULF SEMICONDUCTOR ]
