GBL005 thru GBL10
Glass Passivated Single-Phase Bridge Rectifiers
Reverse Voltage 50 to 1000 Volts Forward Current 4.0 Amperes
Features
ꢀ Ideal for printed circuit boards
ꢀ High surge current capability
ꢀ Typical IR less than 0.1µA
ꢀ High case dielectric strength
ꢀ Solder Dip 260 °C, 40 seconds
Mechanical Data
ꢀ Case: GBL
Epoxy meets UL-94V-0 Flammability rating
ꢀ Terminals: Matte tin plated (E3 Suffix) leads, solderable per
J-STD-002B and JESD22-B102D
ꢀ Polarity: As marked on body
Typical Applications
General purpose use in ac-to-dc bridge full wave rectification for
Monitor, TV, Printer, SMPS, Adapter, Audio equipment, and Home
Appliances application
Package outline dimensions in inches (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25oC ambient temperature unless otherwise specified.
Parameter
Symbols
GBL005 GBL01 GBL02 GBL04 GBL06 GBL08 GBL10
Units
Maximum repetitive peak reverse voltage
Maximum RMS voltage
VRRM
VRMS
VDC
50
35
50
100
70
200
140
200
400
280
400
600
420
600
800
560
800
1000
700
Volts
Volts
Volts
Maximum DC blocking voltage
100
1000
(1)
Maximum average forward rectified output
current at
TC=50oC
TA=40oC
4.0
3.0
IF(AV)
IFSM
Amps
Amps
(2)
Peak forward surge current, 8.3ms single half sine-wave
superimposed on rated load (JEDEC Method)
150.0
Rating for fusing (t < 8.3ms)
I2t
93
A2sec
Volts
Maximum instantaneous forward voltage drop per leg at 2.0A
VF
1.0
Maximum DC reverse current
at rated DC blocking voltage per leg
TA=25oC
10.0
500
uA
pF
IR
TA=150oC
Typical junction capacitance per leg at 4.0V, 1MHz
Typical thermal resistance per leg
CJ
95
40
(2)
RθJA
RθJL
22
3.5
oC/W
oC
(1)
Operating junction and storage temperature range
TJ, TSTG
-55 to +150
Notes:
1. Unit mounted on 3.0 x 3.0 x 0.11” thick (7.5 x 7.5 x 0.3 cm) Al. plate
2. Unit mounted on P.C.B. at 0.375” (9.5 mm) lead length and 0.5 x 0.5" (13 x13 mm) copper pads
436
GOOD-ARK [ GOOD-ARK ELECTRONICS ]
