Global Mixed-mode Technology Inc.
G5105
C
D
L
E
E1
θ1
e
e1
A2
A
y
b
A1
TSOT-23-6 (TP) Package
Note:
1. Dimension D does not include mold flash, protrusions or tate burrs. Mold flash, protrusions or gate burrs shall not exceed
0.1mm PER end. Dimension E1 does not include interlead flash or protrusion. Interlead flash or protrusion shall not ex-
ceed 0.15mm PER side.
2. The package top may be smaller than the package bottom. Dimensions D and E1 are determined at the outermost ex-
tremes of the plastic body exclusive of mold flash, tie bar burrs, gate burrs and interlead flash, but including any mismatch
between the top and bottom of the plastic body.
DIMENSION IN MM
DIMENSION IN INCH
SYMBOL
MIN.
0.75
0.00
0.70
0.35
0.10
2.80
2.60
1.50
NOM.
-----
-----
0.75
-----
-----
2.90
2.80
1.60
MAX.
0.90
0.10
0.80
0.51
0.25
3.00
3.00
1.70
MIN.
0.030
0.000
0.028
0.014
0.004
0.110
0.102
0.059
NOM.
-----
-----
0.030
-----
-----
MAX.
0.035
0.004
0.031
0.020
0.010
0.118
0.118
0.067
A
A1
A2
b
C
D
E
E1
e
e1
L
y
0.114
0.110
0.063
0.0374 BSC
0.0748 BSC
-----
0.95 BSC
1.90 BSC
-----
0.37
-----
0°
-----
0.10
8°
0.015
-----
0.004
8°
-----
-----
-----
-----
θ1
0°
Taping Specification
PACKAGE
SOT-23-6
Q’TY/REEL
3,000 ea
TSOT-23-6
3,000 ea
Feed Direction
SOT- 23-6 / TSOT-23-6 Package Orientation
GMT Inc. does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and GMT Inc. reserves the right at any time without notice to change said circuitry and specifications.
TEL: 886-3-5788833
http://www.gmt.com.tw
Ver: 0.6 Preliminary
May 10, 2006
11
GMT [ GLOBAL MIXED-MODE TECHNOLOGY INC ]
