GS1881, GS4881, GS4981 Monolithic Video Sync Separators
Features
Description
•
noise tolerant odd/even flag, back porch and
horizontal sync pulse
The GS1881, GS4881 and GS4981 are general purpose sync
separators for use in a wide variety of video applications.
The devices extract the timing information from composite
video signals with scan rates from 15 to 130kHz.
•
•
•
•
fast recovery from impulse noise
excellent temperature stability
The GS1881 is a drop-in replacement for the industry
standard LM1881 with much improved performance. The
device generates composite sync, vertical sync, back porch
and odd/even field signals. The GS4881 is identical to the
GS1881 but features a noise immune back porch pulse
which maintains a constant H rate during the vertical
interval. The GS4981 is identical to the GS4881, except that
it provides horizontal sync in place of the odd/even output.
0.5V to 4Vpp input signal amplitude with 5V supply
well-controlled clamp discharge current and slicing
level
•
•
programmable horizontal scan rate (up to 130kHz)
composite, vertical, back porch, odd/even (GS1881,
GS4881), horizontal (GS4981) outputs
•
predictable vertical output pulse width with default
trigger for non-standard video signals
All three devices feature a self-adjusting windowing circuit
for noise immunity, which synchronizes to H rate. This
windowing circuit determines the odd or even field in the
GS1881 and GS4881, gates the back porch pulse in the
GS4881 and GS4981, and generates the horizontal sync
output in the GS4981.
•
•
•
Pb-free and Green
5V to 12V supply voltage range
pin compatible with LM1881 sync separator
Application Selection Chart
The devices feature an improved input stage which ensures
that the input signal is sliced at a predictable point due to
well-controlled input clamp discharge current and sync
slicing level. A missing pulse detector enables the devices
to recover quickly from impulse noise disturbances by
temporarily increasing the clamp discharge current by
roughly ten times. The input stage will operate with signals
from 0.5 to 4Vp-p with a 5V supply.
Application
Choose Device:
Direct LM1881 Replacement with
Improved Performance
GS1881
New Applications Substitution for
LM1881
GS4881
GS4981
New Applications Requiring Horizontal
Sync Output
The GS1881, GS4881 and GS4981 also feature a predictable
vertical output pulse width with a default trigger for
non-standard video signals. All three are available in
commercial and industrial temperature ranges and are
packaged in both DIP and SOIC.
GS1881, GS4881, GS4981 Monolithic Video Sync
Separators
Data Sheet
1 of 29
www.gennum.com
Proprietary & Confidential
6926 - 5
November 2009
GENNUM [ GENNUM CORPORATION ]
