欢迎访问ic37.com |
会员登录 免费注册
发布采购

GS1561-CFE3 参数 Datasheet PDF下载

GS1561-CFE3图片预览
型号: GS1561-CFE3
PDF下载: 下载PDF文件 查看货源
内容描述: GS1560A / GS1561 HD - LINX -R II双率解串器 [GS1560A/GS1561 HD-LINX-R II Dual-Rate Deserializer]
分类和应用: 存储静态存储器
文件页数/大小: 80 页 / 1307 K
品牌: GENNUM [ GENNUM CORPORATION ]
 浏览型号GS1561-CFE3的Datasheet PDF文件第49页浏览型号GS1561-CFE3的Datasheet PDF文件第50页浏览型号GS1561-CFE3的Datasheet PDF文件第51页浏览型号GS1561-CFE3的Datasheet PDF文件第52页浏览型号GS1561-CFE3的Datasheet PDF文件第54页浏览型号GS1561-CFE3的Datasheet PDF文件第55页浏览型号GS1561-CFE3的Datasheet PDF文件第56页浏览型号GS1561-CFE3的Datasheet PDF文件第57页  
GS1560A/GS1561 Data Sheet  
3.10.4.1 Video Standard Indication  
The video standard codes reported in the VD_STD[4:0] bits of the  
VIDEO_STANDARD register represent the SMPTE standards as shown in  
Table 3-9.  
In addition to the 5-bit video standard code word, the VIDEO_STANDARD register  
also contains two status bits. The STD_LOCK bit will be set HIGH whenever the  
flywheel has achieved full synchronization. The INT_PROG bit will be set LOW if  
the detected video standard is progressive and HIGH if the detected video  
standard is interlaced.  
The VD_STD[4:0], STD_LOCK and INT_PROG bits of the VIDEO_STANDARD  
register will default to zero after device reset. The VD_STD[4:0] and INT_PROG  
bits will also default to zero if the device loses lock to the input data stream,  
(LOCKED = LOW), or if the SMPTE_BYPASS pin is asserted LOW. The  
STD_LOCK bit will retain its previous value if the input is removed.  
Table 3-7: Host Interface Description for Video Standard and Data Format Register  
Register Name  
Bit  
Name  
Description  
R/W  
Default  
VIDEO_STANDARD  
Address: 004h  
15  
Not Used.  
0
0
14-10  
9
VD_STD[4:0]  
INT_PROG  
Video Data Standard (see Table 3-9).  
R
R
Interlace/Progressive: Set LOW if detected video  
standard is PROGRESSIVE and is set HIGH if it is  
INTERLACED.  
8
STD_LOCK  
Standard Lock: Set HIGH when flywheel has achieved  
full synchronization.  
R
R
0
7-4  
CDATA_FORMAT[3:0]  
Chroma Data Format. Set HIGH in SD mode.  
Indicates chroma data format in HD mode (see  
Table 3-10).  
Fh  
3-0  
YDATA_FORMAT[3:0]  
Luma Data Format. Indicates Luma data format in HD  
mode and data format in SD mode (see Table 3-10).  
R
Fh  
Table 3-8: Host Interface Description for Raster Structure Registers  
Register Name  
Bit  
Name  
Description  
R/W  
Default  
RASTER_STRUCTURE1  
Address: 00Eh  
15-12  
11-0  
Not Used.  
R
0
0
0
0
RASTER_STRUCTURE1[11:0]  
Words Per Active Line.  
Not Used.  
RASTER_STRUCTURE2  
Address: 00Fh  
15-12  
11-0  
RASTER_STRUCTURE2[11:0]  
Words Per Total Line.  
Not Used.  
R
RASTER_STRUCTURE3  
Address: 010h  
15-11  
10-0  
RASTER_STRUCTURE3[10:0]  
Total Lines Per Frame.  
Not Used.  
R
RASTER_STRUCTURE4  
Address: 011h  
15-11  
10-0  
RASTER_STRUCTURE4[10:0]  
Active Lines Per Field.  
R
27360 - 8 September 2005  
53 of 80  
 复制成功!