GL811E USB 2.0 to ATA/ATAPI Bridge Controller
CHAPTER 2 FEATURES
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
Complies with Universal Serial Bus specification rev. 2.0.
Complies with ATA/ATAPI-6 specification rev 1.0.
Complies with USB Storage Class specification ver.1.0. (Bulk only protocol)
Operating system supported: Win XP / 2000 / Me / 98 / 98SE; Mac OS 9.X / X.
Integrated USB 2.0 Transceiver Macrocell Interface (UTMI) transceiver and Serial Interface Engine (SIE).
USB 2.0 certified (TestID=40380268)
Supports 4 endpoints: Control (0) / Bulk Read (1) / Bulk Write (2) / Interrupt (3).
64 / 512 bytes Data Payload for full / high speed Bulk Endpoint.
Supports 16-bit Multiword DMA mode and Ultra DMA mode interface (Ultra 33 / 66).
Embedded 7.5 MIPS RISC CPU.
ROM size: 4k words; RAM size: 128 bytes.
Supports Power Down mode and USB suspend indicator.
Supports USB 2.0 TEST mode features.
Supports 2 GPIO (GPIO5 & 6) for programmable AP (only for 64 pin package).
Supports device power control for power on/off when running suspend mode (only for 64 pin package).
Supports 32 bit and 48 bit LBA hard disk.
Provides LED indicator for Full Speed and High Speed (only for 64 pin package).
12 MHz external clock to provide better EMI.
3.3V power input; 5V tolerance pad for IDE interface.
Supports Wakeup ability.
Available in 48-pin LQFP and 64-pin LQFP package.
©2000-2006 Genesys Logic Inc. - All rights reserved.
Page 8
GENESYS [ GENESYS LOGIC ]
