MBM29F400TC-55/-70/-90/MBM29F400BC-55/-70/-90
■ ABSOLUTE MAXIMUM RATINGS
Storage Temperature ..................................................................................................–55°C to +125°C
Ambient Temperature with Power Applied ..................................................................–40°C to +85°C
Voltage with respect to Ground All pins except A9, OE, RESET (Note 1)...................–2.0 V to +7.0 V
VCC (Note 1) ................................................................................................................–2.0 V to +7.0 V
A9, OE, RESET (Note 2) .............................................................................................–2.0 V to +13.5 V
Notes: 1. Minimum DC voltage on input or I/O pins are –0.5 V. During voltage transitions, inputs may negative
overshoot VSS to –2.0 V for periods of up to 20 ns. Maximum DC voltage on output and I/O pins are
VCC +0.5 V. During voltage transitions, outputs may positive overshoot to VCC +2.0 V for periods of up
to 20 ns.
2. Minimum DC input voltage on A9, OE, RESET pins are –0.5 V. During voltage transitions, A9, OE, RESET
pins may negative overshoot VSS to –2.0 V for periods of up to 20 ns. Maximum DC input voltage on A9,
OE, RESET pins are +13.0 V which may positive overshoot to 14.0 V for periods of up to 20 ns. Voltage
difference between input voltage and power supply. (VIN - VCC) do not exceed 9 V.
WARNING: Semiconductor devices can be permanently damaged by application of stress (voltage, current,
temperature, etc.) in excess of absolute maximum ratings. Do not exceed these ratings.
■ RECOMMENDED OPERATING RANGES
Commercial Devices
Ambient Temperatue (TA) .............................................................................–40°C to +85°C
VCC Supply Voltages
MBM29F400TC/BC-55..............................................................................+4.75 V to +5.25 V
MBM29F400TC/BC-70/-90 .......................................................................+4.50 V to +5.50 V
Operating ranges define those limits between which the functionality of the devices are guaranteed.
WARNING: The recommended operating conditions are required in order to ensure the normal operation of the
semiconductor device. All of the device’s electrical characteristics are warranted when the device
is operated within these ranges.
Always use semiconductor devices within their recommended operating condition ranges.
Operation outside these ranges may adversely affect reliability and could result in device failure.
No warranty is made with respect to uses, operating conditions, or combinations not represented
on the data sheet. Users considering application outside the listed conditions are advised to contact
their FUJITSU representatives beforehand.
22