MB90560/565 Series
2. Recommended Operating Conditions
Value
(VSS = AVSS = 0.0 V)
Parameter
Symbol
Unit
Remarks
Min.
Max.
Normal operation (MB90562, 562A, 561,
561A, and V560)
3.0
5.5
V
VCC
Power supply voltage
4.5
5.5
V
V
V
V
V
V
V
V
Normal operation (MB90F562 and F562B)
Maintaining state in stop mode
CMOS input pin
VCC
VIH
3.0
5.5
0.7 VCC
0.8 VCC
VCC − 0.3
VSS − 0.3
VSS − 0.3
VSS − 0.3
VCC + 0.3
VCC + 0.3
VCC + 0.3
0.3 VCC
0.2 VCC
VSS + 0.3
Input “H” voltage
Input “L” voltage
VIHS
VIHM
VIL
CMOS hysteresis input pin
MD input pin
CMOS input pin
VILS
VILM
CMOS hysteresis input pin
MD input pin
Use a ceramic capacitor or other capacitor
with equivalent frequency characteristics.
The capacitance of the smoothing capacitor
connected to the VCC pin must be greater
than CS.
Smoothing capacitor
CS
TA
0.1
1.0
µF
°C
Operating
temperature
−40
+85
• C pin diagram
C
CS
WARNING: The recommended operating conditions are required in order to ensure the normal operation of the
semiconductor device. All of the device’s electrical characteristics are warranted when the device is
operated within these ranges.
Always use semiconductor devices within their recommended operating condition ranges. Operation
outside these ranges may adversely affect reliability and could result in device failure.
No warranty is made with respect to uses, operating conditions, or combinations not represented on
the data sheet. Users considering application outside the listed conditions are advised to contact their
FUJITSU representatives beforehand.
59
FUJITSU [ FUJITSU ]
