FAR Family (C4 series N type)
s
STANDARD FREQUENCY
Standard frequency (kHz)
4,000
4,194
4,915
6,000
6,144
7,373
8,000
8,388
9,830
10,000
11,059
12,000
12,288
14,746
16,000
16,934
19,661
20,000
Package size
N
Resonant resistance
300
Ω
max.
(Symbol: 0)
N
75
Ω
max.
(Symbol: 2)
Notes:
• Fujitsu can also develop applicable device in addition to standard devices if it’s oscillation frequency is
from 4 to 23.9 MHz.
• Resonant resistance of the part other than standard, Fujitsu should specify its resonant resistance
according to applied frequency. (See “• Frequency and standard resonant resistance.”)
• Frequency and standard resonant resistance
Frequency
4.00 to 5.99 MHz
6.00 to 23.99 MHz
Standard resonant resistance
300
Ω
max. (Symbol: 0)
75
Ω
max. (Symbol: 2)
Note:
Resonant resistance of custom designed part should be specified considering matching condition with
applicable IC by Fujitsu.
s
NOTES ON USE
• Handle carefully
• Solder under the following conditions.
5 seconds max. at 230°C (PCB)
Recommended preheating is 150°C for one minute in order not to apply extreme heat to the resonator.
• Avoid extreme fluctuations in temperature.
• There is no specific direction in resonator mounting.
• Oscillation data should be examined when used in oscillation circuit with micon or other ICs.
• This is for reflow solder, not for flow solder.
3
FUJITSU [ FUJITSU COMPONENT LIMITED. ]
