FAR Family (C4 series L type)
s
STANDARD FREQUENCY
Standard frequency (kHz)
24,000 kHz
33,869 kHz
40,000 kHz
Package size
L
Resonant resistance
75
Ω
max.
(Symbol: 2)
Note: Fujitsu can also develop applicable device in addition to standard devices if it’s oscillation frequency is from
24 to 60 MHz.
s
NOTES ON USE
• Handle carefully
• Solder under the following conditions.
5 seconds max. at 230°C (PCB)
Recommended preheating is 150°C for one minute in order not to apply extreme heat to the resonator.
• Avoid extreme fluctuations in temperature.
• There is no specific direction in resonator mounting.
• Oscillation data should be examined when used in oscillation circuit with micon or other ICs.
• This is for reflow solder, not for flow solder.
3