FAR Family (C4 series G type)
s
STANDARD FREQUENCY
Standard frequency (KHz)
8,000
10,000
11,000
11,059
12,000
16,000
Package size
G
Resonant resistance
100
Ω
max. (Symbol: 5)
75
Ω
max. (Symbol: 2)
G
Note: • For oscillation frequency (in 8 to 16 MHz) other than standard, Fujitsu can also develop applicable part.
• Resonant resistance of the part is specified according to applied frequency as above.
s
NOTES ON USE
•
•
Handle carefully
Solder under the following conditions.
5 seconds max. at 230°C (PCB)
Do not apply extreme heat to the resonator. Recommended preheating is 150°C for one minute.
Avoid extreme fluctuations in temperature during use.
There is no specific direction in resonator mounting.
Oscillation data should be examined when used in oscillation circuit with micon or other ICs.
This is for reflow solder, not for flow solder.
•
•
•
•
3