FAR Family (C4 series P/Q type)
s
STANDARD FREQUENCY
Standard frequency (kHz)
4,000
8,000
10,000
12,000
16,000
Package size
P
Resonant resistance
150
Ω
max.
(Symbol: 01)
75
Ω
max.
(Symbol: 02)
Q
Notes:
• Fujitsu can also develop applicable device in addition to standard devices if it’s oscillation frequency is
from 4 to 16 MHz.
• Resonant resistance of the part other than standard, Fujitsu should specify its resonant resistance
according to applied frequency. (See “• Frequency and standard resonant resistance.”)
• Frequency and standard resonant resistance
Frequency
4.00 to 5.99 MHz
6.00 to 16.00 MHz
Standard resonant resistance
150
Ω
max. (Symbol: 1)
75
Ω
max. (Symbol: 2)
s
NOTES ON USE
• Handle carefully
• Solder under the following conditions.
5 seconds max. at 230°C (PCB)
Recommended preheating is 150°C for one minute in order not to apply extreme heat to the resonator.
• Avoid extreme fluctuations in temperature.
• There is no specific direction in resonator mounting.
• Oscillation data should be examined when used in oscillation circuit with microcomputer or other ICs.
• This is for reflow solder, not for flow solder.
3
FUJITSU [ FUJITSU COMPONENT LIMITED. ]
