MB95120MB Series
■ MAIN CHANGES IN THIS EDITION
Page
Section
Change Results
⎯
⎯
Added the MB95128MB (MASK ROM product)
■ I/O MAP
Changed as follows for R/W of Reset source register
R → R/W
26
■ ELECTRICAL CHARACTERISTICS
1. Absolute Maximum Ratings
For the operating temperature, the max rating is
changed;
35
+ 85 °C → + 105 °C
37 to 42, 44, Temperature conditions on table
47 to 51, 53,
55 to 57,
59 to 63
Changed as follows
TA = − 40 °C to + 85 °C → TA = − 40 °C to + 105 °C
■ ELECTRICAL CHARACTERISTICS
4. AC Characteristics (1) Clock Timing
42
Added “Main PLL multiplied by 4” in the Clock frequency
(2) Source Clock/Machine Clock
• Changed in the remarks of source clock cycle time
(when using main clock)
Min : FCH = 16.25 MHz, PLL multiplied by 1
→ Min : FCH = 8.125 MHz, PLL multiplied by 2
• Changed the footnote of *1;
PLL multiplication of main clock (select from 1, 2, 2.5
multiplication) →
44
PLL multiplication of main clock (select from 1, 2, 2.5,
4 multiplication)
• Added “ × 4” in the Main PLL of “• Outline of clock
generation block“
Changed as follows
• Operating voltage − Operating frequency (TA =
45
46
− 40 °C to + 85 °C) →
• Operating voltage − Operating frequency (TA =
− 40 °C to + 105 °C)
Changed the figure of • Main PLL operation frequency
Added the *4
57
68 to 73 ■ EXAMPLE CHARACTERISTICS
(8) I2C Timing
Added the ■ EXAMPLE CHARACTERISTICS
The vertical lines marked in the left side of the page show the changes.
79