MB95120MB Series
(Continued)
• Timebase timer
×
1 channel
• Watch prescaler
×
1 channel
•
LIN-UART
×
1 channel
• LIN function, clock asynchronous (UART) or clock synchronous (SIO) serial data transfer capable
• Full duplex double buffer
•
UART/SIO
×
1 channel
• Clock asynchronous (UART) or clock synchronous (SIO) serial data transfer capable
• Full duplex double buffer
2
C*
×
1 channel
•
I
• Built-in wake-up function
•
External interrupt
×
12 channels
• Interrupt by edge detection (rising, falling, or both edges can be selected)
• Can be used to recover from low-power consumption (standby) modes.
•
8/10-bit A/D converter
×
12 channels
• 8-bit or 10-bit resolution can be selected
•
LCD controller (LCDC)
• 40 SEG
×
4 COM (Max 160 pixels)
• With blinking function
•
Low-power consumption (standby) mode
• Stop mode
• Sleep mode
• Watch mode
• Timebase timer mode
•
I/O port
• The number of maximum ports : Max 87
• Port configuration
•
General-purpose I/O ports (N-ch open drain) : 2 ports
•
General-purpose I/O ports (CMOS)
: 85 ports
•
Programmable input voltage levels of port
Automotive input level
/
CMOS input level
/
hysteresis input level
•
Dual operation Flash memory
• Erase/write and read can be executed in the different bank (Upper Bank/Lower Bank) at the same time.
•
Flash memory security function
Protects the content of Flash memory (Flash memory device only)
*:
Purchase of Fujitsu I
2
C components conveys a license under the Philips I
2
C Patent Rights to use, these
components in an I
2
C system provided that the system conforms to the I
2
C Standard Specification as defined
by Philips.
2