MB95120MB Series
(Continued)
Part number
MB95F124MB
MB95F126MB
MB95F128MB
MB95F124NB
MB95F126NB
MB95F128NB
MB95F124JB
MB95F126JB
MB95F128JB
MB95128MB
Parameter
COM output
SEG output
: 4 (Max)
: 40 (Max)
LCD drive power supply (bias) pin
40 SEG × 4 COM
Duty LCD mode
: 4 (Max)
: 160 pixels can be displayed.
LCD controller
(LCDC)
Operable in LCD standby mode
With blinking function
Built-in division resistance for LCD drive
Two clock modes and two counter operating modes can be selected.
16-bit reload timer Square waveform output
(1 channel)
Count clock : 7 internal clocks and external clock can be selected.
Counter operating mode : reload mode or one-shot mode can be selected.
Each channel of the timer can be used as “8-bit timer × 2 channels” or “16-bit timer ×
1 channel”.
Built-in timer function, PWC function, PWM function, capture function and square
waveform output
8/16-bit compound
timer (2 channels)
Count clock : 7 internal clocks and external clock can be selected.
PWM mode or one-shot mode can be selected.
Counter operating clock : Eight selectable clock sources
Support for external trigger start
16-bit PPG
(2 channels)
Each channel of the PPG can be used as “8-bit PPG × 2 channels” or “16-bit PPG ×
1 channel”.
Counter operating clock : Eight selectable clock sources
8/16-bit PPG
(2 channels)
Count clock : Four selectable clock sources (125 ms, 250 ms, 500 ms, or 1 s)
Counter value can be set from 0 to 63 (Capable of counting for 1 minute when selecting
clock source 1 second and setting counter value to 60) .
Watch counter
Watch prescaler
(1 channel)
4 selectable interval times (125 ms, 250 ms, 500 ms, or 1 s)
External interrupt
(12 channels)
Interrupt by edge detection (rising, falling, or both edges can be selected.)
Can be used to recover from standby modes.
3
Supports automatic programming, Embedded AlgorithmTM
Write/Erase/Erase-Suspend/Resume commands
A flag indicating completion of the algorithm
Number of write/erase cycles (Minimum) : 10000 times
Data retention time : 20 years
*
Flash memory
Standby mode
Erase can be performed on each block
Block protection with external programming voltage
Dual operation Flash memory
Flash Security Feature for protecting the content of the Flash
Sleep, stop, watch, and timebase timer
*1 : For ROM capacitance and RAM capacitance, refer to “■ MEMORY LINEUP”.
*2 : For details of option, refer to “■ MASK OPTION”.
*3 : Embedded Algorithm is a trade mark of Advanced Micro Devices Inc.
Note : Part number of evaluation product in MB95120MB series is MB95FV100D-103. When using it, the MCU
board (MB2146-303A) is required.
5
FUJITSU [ FUJITSU ]
