MB95110B Series
(Continued)
Part number
Parameter
8/16-bit
compound timer
(2 channels)
MB95116B
MB95F118BS
MB95F118BW
Each channel of the timer can be used as “8-bit timer
×
2 channels” or “16-bit timer
×
1 channel”.
Built-in timer function, PWC function, PWM function, capture function and square
wave form output
Count clock : 7 internal clocks and external clock can be selected.
PWM mode or one-shot mode can be selected.
Counter operating clock : 8 selectable clock sources
Support for external trigger start
Each channel of the PPG can be used as “8-bit PPG
×
2 channels” or “16-bit PPG
×
1 channel”.
Counter operating clock : Eight selectable clock sources
16-bit PPG
Peripheral functions
8/16-bit PPG
(2 channels)
Count clock : Four selectable clock sources (125ms, 250ms, 500ms, or 1s)
Watch counter
Counter value can be set from 0 to 63. (Capable of counting for 1 minute when
(for dual clock product)
selecting clock source 1 second and setting counter value to 60)
Watch prescaler
4 selectable interval times (125 ms, 250 ms, 500 ms, or 1 s)
(for dual clock product)
External interrupt
(8 channels)
Interrupt by edge detection (rising, falling, or both edges can be selected)
Can be used to recover from standby modes.
Supports automatic programming, Embedded Algorithm
TM
*
3
Write/Erase/Erase-Suspend/Resume commands
A flag indicating completion of the algorithm
Number of write/erase cycles (Minimum) : 10000 times
Data retention time : 20 years
Boot block configuration
Erase can be performed on each block
Block protection with external programming voltage
Flash Security Feature for protecting the content of the Flash
Sleep, stop, watch (for dual clock product) , and time-base timer
Flash memory
Standby mode
*1 : For details of option, refer to “■ MASK OPTIONS”.
*2 : Specify clock mode when ordering MASK ROM.
*3 : Embedded Algorithm is a trade mark of Advanced Micro Devices Inc.
Note : Part number of the evaluation products in MB95110B series is MB95FV100D-101. When using it, the MCU
board (MB2146-301A) is required.
4