FTP-628MCL401/451
n
sPeCiFiCaTiONs
Item
Interface
For print head
Power
supply
For motor
For cutter motor
For logic
Dimensions
Mechanism with cutter
Interface board
Mechanism with cutter
Interface board
Head
Cutter
Platen
Operating temperature*
Operating humidity
Operating
environment Storage temperature
Storage humidity
Head temperature
detection
Detection
function
Paper out/mark detection
Platen release
Movable blade
Specification
Conforms to RS232C / Centronics
4.2 - 8.5 VDC average current, 1.8 (2.4)A at 7.2V
(print ratio: 12.5%, print speed: 60mm/sec. )
4.2 - 8.5 VDC, 1A maximum
4.75 - 8.5 VDC, 1A maximum
5 VDC ± 5%, 0.1 A maximum
81.2 x 42.2 x 21.8 mm (WxDxH)
70 x 60 x12 mm
Approximately 97g
Approximately 25g
Pulse resistance: 100 million pulses/dot (under our standard
conditions); Abrasion resistance: paper traveling distance 50km
(print ratio: 12.5% or less)
500,000 cuts
5,000 times (open/close)
0˚ C to 50˚ C
20 to 85% RH (no condensation)
-20˚ C to +60˚ C (paper not included)
5 to 95% RH (no condensation)
Detected by thermistor
Detected by photo-interrupter
Detected by sliding switch
Detected by photo-interrupter
High Sensitive Paper
Standard paper:
TF50KS-E4 (Nippon Paper)
TF60KS-E(Nippon Paper), FTP-
020PU001 (58mm), PD105R (Oji Paper),
FTP-020P0701 (58mm)
TF60KS-F1, FTP-020P0102 (58mm),
PD170R (Oji Paper), P220VBB-1
Mitsubishi Paper)
PD160R-N (Oji Paper), AFP-235
(Mitsubishi Paper), TP50KJ-R (Nippon
Paper), HA220AA (Nippon Paper)
Weight
Life
Recommended thermal sensitive paper
Medium Life Paper
Long Life Paper
*+5˚C to +40˚C printing density assurance rance (-25 to 70˚C capability)
3