VM800C Datasheet
Version 1.0
Document Reference No.: FT_000844
Clearance No.: FTDI#
345
Signal
Pin No
(3.5”)
Pin No
(4.3/5.0”)
19
Description
Bit 6 of Green RGB signals,
push-pull output, 4/8mA
sink/source current
Bit 7 of Green RGB signals,
push-pull output, 4/8mA
sink/source current
Bit 2 of Blue RGB signals, push-
pull output, 4/8mA sink/source
current.
Bit 3 of Blue RGB signals, push-
pull output, 4/8mA sink/source
current.
Bit 4 of Blue RGB signals, push-
pull output, 4/8mA sink/source
current.
Bit 5 of Blue RGB signals, push-
pull output, 4/8mA sink/source
current.
Bit 6 of Blue RGB signals, push-
pull output, 4/8mA sink/source
current.
Bit 7 of Blue RGB signals, push-
pull output, 4/8mA sink/source
current.
X +ve touch
Y –ve touch
X –ve touch
Y +ve touch
3V3 Power
Ground
No connect
G6
26
20
G7
27
23
B2
30
24
B3
31
25
B4
32
26
B5
33
27
B6
34
28
B7
XP
YM
XM
YP
3V3
GND
35
48
49
50
51
9,10,11,41,42
12,13,20,21,28,2953,54
37
38
39
40
4
3,5,6,13,14,21,22,29,36
35
NC
5,6,7,39,40,43,44,45,46,47
Table 3-4 – J1 Pinout
J2 - Selection between lineout or loop back into the power amplifier.
Selection between audio lineout or loop back into the power amplifier. (Footprint only, JP2 next to J2
is connected by default for on board amplifier and on board mini speaker). If J2 is soldered and used
for audio output selection, JP2 needs to be removed.
Pin No.
1 -2
Name
Audio amp enabled
2-3
Audio amp mute, Audio lineout on pin 1
Table 3-5 – J2 Pin Options
J3 – SP+
Audio speaker +ve from the onboard amplifier.
8
Copyright © 2013 Future Technology Devices International Limited