Document Reference No.: FT_000237
V2DIP2-48 VNC2-48 Development Module Datasheet Version 1.01
Clearance No.: FTDI#
152
`
2
Features
Uses FTDI’s
VNC2-48Q
embedded USB host
controller IC device
Two USB ‘A’ type socket to interface with USB
peripheral devices
Jumper selectable UART, parallel FIFO or SPI
MCU interfaces
UART, parallel FIFO and SPI interfaces can be
programmed to a choice of available I/O pins
Single 5V supply input from DIL connectors or
5V supplied via USB VBUS slave interface or
debugger module.
Auxiliary 3.3 V / 200 mA power output to
external logic.
All VNC2 signals available on 0.6” wide. 0.1”
pitch DIL male connectors.
Power and traffic indicator LED’s
V2DIP2-48 is a Pb-free, RoHS complaint
development module.
Debugger interface pin available on DIL pins or
via 6 way male header which interfaces to
separate debugger module.
Firmware upgrades via UART or debugger
interface pin header
FOC software development suite of tools to
create customised firmware includes a
Compiler, Linker,Debugger and Assembler all
wrapped up in an easy to use Integrated
Design Environment GUI.
The V2DIP2-48 incorporates
the following features
:
Copyright © 2010 Future Technology Devices International Limited
3