Document Reference No.: FT_000164
V2DIP2-32 VNCL2-32Q Development Module Datasheet Version 1.01
Clearance No.: FTDI# 151
`
2
Features
The V2DIP2-32 incorporates
the following features
:
Uses FTDI’s
the VNC2-32Q
embedded USB
host controller IC device
Two USB ‘A’ type socket to interface with USB
peripheral devices
UART, parallel FIFO and SPI interfaces can be
programmed to a choice of available I/O pins
Single 5V supply input from DIL connectors or
5V supplied via USB VBUS slave interface or
debugger module.
Auxiliary 3.3 V / 200 mA power output to
external logic
Power and traffic indicator LED’s
All VNC2 signals available on 0.6” wide / 0.1”
pitch DIL male connectors.
V2DIP2-32 is a Pb-free, RoHS complaint
development module
Debugger interface pin available on DIL pins or
via 6 way male header which interfaces to
separate debugger module
Firmware upgrades via UART or debugger
interface pin header
FOC software development suite of tools to
create customised firmware includes a
Compiler, Linker,Debugger and Assembler all
wrapped up in an easy to use Integrated
Design Environment GUI.
Copyright © 2010 Future Technology Devices International Limited
3