Document Reference No.: FT_000165
V2DIP1-64 VNCL2-64Q Development Module Datasheet Version 1.01
Clearance No.: FTDI# 154
2
Features
Uses FTDI’s VNC2-64Q embedded USB host
controller IC device
USB single ‘A’ type USB to interface with USB
peripheral devices.
Second USB interface port available via
module header pins if required.
UART, parallel FIFO and SPI interfaces can be
programmed to a choice of available I/O pins
Single 5V supply input from DIL connectors or
5V supplied via USB VBUS slave interface or
debugger module.
Auxiliary 3.3 V / 200 mA power output to
external logic
All VNC2 signals available on 0.8” wide, 0.1”
pitch DIL male connectors.
Power and traffic indicator LED’s
V2DIP1-64 is a Pb-free, RoHS complaint
development module
Debugger interface pin available on DIL pins or
via 6 way male header which interfaces to
separate debugger module.
Firmware upgrades via UART or debugger
interface.
FOC software development suite of tools to
create customised firmware includes a
Compiler, Linker,Debugger and Assembler all
wrapped up in an easy to use Integrated
Design Environment GUI.
The V2DIP1-64 incorporates the following
features
:
Copyright © 2010 Future Technology Devices International Limited
3