Document Reference No.: FT_000247
V2-EVAL Vinculum II Evaluation Board Datasheet Version 2.0
Clearance No.: FTDI#148
4
4.1
Initial Board Set-up & Test
Installing VNC2 Daughterboard
Prior to first powering the board, users must ensure that the daughterboard module hosting the VNC2
chip is correctly installed on to the main V2-Eval board. The V2-Eval board has 4 socket connectors, J1-
J4, onto which the VNC2 daughterboard module is installed.
On the VNC2 daughterboard module, connector JN1 connects to corresponding socket J1, JN2 connects to
socket J2, JN3 connects to socket J3 and JN4 connects to J4 on the V2-Eval board.
Warning!
Please check that the VNC2 daughterboard module is correctly installed onto the V2-Eval
board prior to power-up. Incorrect installation can cause the VNC2 to not function.
Figure 4.1
V2-EVAL Board with VNC2 Daughterboard Installed
Copyright © 2010 Future Technology Devices International Limited
11
FTDI [ FUTURE TECHNOLOGY DEVICES INTERNATIONAL LTD. ]
