Document Reference No.: FT_000247
V2-EVAL Vinculum II Evaluation Board Datasheet Version 2.0
Clearance No.: FTDI#148
Figure 7.4: Non-WHQL Driver Warning
4. In the next screen the Hardware Wizard will copy the the required driver files.
Figure 7.5: Driver installation
5. In the next stage, the process will repeat another three times until all four ports on the FT4232H
have been identified by the operating system. Windows should present a message to inform
whether or not the drivers for each port have been successfully installed.
6. To verify that the drivers have been installed successfully, open the Device Manager located in
"Control Panel\System" then select the "Hardware" tab and click "Device Manger") and select
"View > Devices by Connection". Each FT4232H port should appear as a "USB Serial Converter”
under the “USB Serial Bus Controllers”. Further under the “Ports” section four “USB Serial Ports”
should be listed, as per Figure 7.6.
Copyright © 2010 Future Technology Devices International Limited
43
FTDI [ FUTURE TECHNOLOGY DEVICES INTERNATIONAL LTD. ]
