Document Reference No.: FT_000247
V2-EVAL Vinculum II Evaluation Board Datasheet Version 2.0
Clearance No.: FTDI#148
5.8
USB2 interface CN2.
Figure 5.13
USB2 Interface CN2
VNC2 USB2 transceiver pins are brought on this connector. Depending on the version of the firmware
running on the device, the port can be configured as host or slave port.
VCN2 pin number
Connector
Signal
name
VCN2 pin
name
IO
type
pin
number
Description
32-
48-
64-
PIN
PIN
PIN
5V power rail.
Can be used to power external devices
(37)
5V
1
-
-
-
USB2-DM
USB2-DP
GND
2
3
USB2 DM
20
21
28
29
-
36
37
IO
IO
-
USB2 transceiver, data line Minus
USB2 transceiver, data line Plus
Ground pin
USB2 DP
4
-
-
Shield
Notes:
5, 6
-
-
Connector shield. Connected to ground.
(37) This pin is connected to the board‟s 5V power rail. External device can draw no more than 250mA when
board is powered from power supply and no more than 50mA when the board is powered from USB power
bus.
Table 5.12 USB2 Host / Slave connector CN2
Copyright © 2010 Future Technology Devices International Limited
27