DS_FT311D USB ANDROID HOST IC Datasheet
Version 1.2
Document No.: FT_000660 Clearance No.: FTDI# 305
Peripheral
Signal Name
Outputs Inputs
Description
spi_s_ss#
spi_s_mosi
spi_s_miso
spi_m_clk
0
1
1
1
1
0
1
1
1
0
0
1
1
0
SPI slave select input
SPI master out serial in
SPI master in slave out
SPI clock input – master
spi_m_mosi
spi_m_miso
spi_m_ss_0#
Master out slave in - master
Master in slave out - master
Active low slave select 0 from master to slave 0
SPI
Master
Table 4.1 I/O Peripherals Signal Names
Note: # is used to indicate an active low signal.
4.4 Default Mode Strings
When the USB port is connected to the Android USB port, the Android platform will determine which
application to load based on the strings read from the FT311D. These strings are configurable with a
Windows utility: FT311Cofiguration.exe available for download from the FTDI website at:
http://www.ftdichip.com/Support/SoftwareExamples/Android/FT311Configuration_V010100.zip
Default values for the strings are set in the device as per Table 4.2
Descriptor String
Default Value
FTDI
Manufacturer
Model (depends on GPIO Mode selection):
GPIO
FTDIGPIODemo
FTDIUARTDemo
FTDIPWMDemo
FTDII2CDemo
UART
PWM
I2C
SPI Slave
SPI Master
Version
Serial
FTDISPISlaveDemo
FTDISPIMasterDemo
1.0
VinculumAccessory1
http://www.ftdichip.com
Description URL
Table 4.2 Default Descriptor Strings
Copyright © 2013 Future Technology Devices International Limited
11