CleO35 Module Datasheet
Version 1.0
Document Reference No.: FT_001299 Clearance No.: FTDI#493
Figure 6 - Camera Interface
4.6 Audio Output
CleO35 supports a mono speaker output through CN13. Maximum output power, can drive up to 8 OHM,
1 Watt speaker driver. A readymade speaker module (CleO-SPK1) is also available from FTDI; visit the
FTDI Chip website for more information.
An alternative, mono line-in audio input is also provided on CN13. Users can drive in their own audio
source to the on board power amplifier. See the Table 3 for the pin list for CN13.
Pin No
Pin Name
SP-
Description
1
2
3
4
Speaker out negative
Speaker out positive
Ground
SP+
GND
EXT_AUD
Ext audio line in
Table 3 - Pin List of CN3
Copyright © Future Technology Devices International Limited
11