Models 900CT & 900BT
Model 900 Series
Rear Panel Description
Single Channel –
Certified
Location of Rear Panel Terminals, Controls and Labels
Model
900CT
Feb. 03
SELECT
FUSE
NOM. FREQ.
SN: 00101
115v
(250v 1.0A)
60 Hz
900CT-9L8B
230v
(250v 0.5A)
50 Hz
MADE IN U.S.A.
WARNING:
Do not remove covers, no user serviceable parts inside
.
Contact :
Frequency Devices for service,
tech@freqdev.com
N
O
P
Model
900BT
Feb. 03
SELECT
FUSE
NOM. FREQ.
SN: 00102
115v
(250v 1.0A)
60 Hz
900BT-9L8B
230v
(250v 0.5A)
50 Hz
MADE IN U.S.A.
WARNING:
Do not remove covers, no user serviceable parts inside
.
Contact :
Frequency Devices for service,
tech@freqdev.com
N. IDENTIFICATION LABEL:
This label
identifies the Model number, filter type,
serial number, date of manufacture,
operating
power
limits
and
fuse
requirements of the instrument.
O. AC POWER CONNECTION:
Denotes
plug and fuse location.
P. POWER ON/OFF Switch:
Is a two-
position toggle switch on the back panel
that interrupts/completes the power
circuit.
Q. VOLTAGE Selector Module:
The
power module window shows the
operating voltage (115 V
ac
or 230 V
ac
). At
time of shipment, the voltage window is
set in the 115 V
ac
position. For 230 V
ac
operations, use a screwdriver blade to pry
open the module door, remove the red
fuse cartridge, turn it 180 degrees, re-
insert and close the module door. The
numerals 230 V
ac
will now show in the
module window. Repeat procedure to
change back to 115 V
ac
.
Q
F use
h o ld e r
O p tio n a l
s w itc h
5
1784 Chessie Lane, Ottawa, IL 61350 • Tel: 800/252-7074, 815/434-7800 • FAX: 815/434-8176
e-mail: sales@freqdev.com
•
Web Address: http://www.freqdev.com