REVISION HISTORY
REVISION HISTORY
REVISION
3.0
DATE
DESCRIPTION OF CHANGES
10/2007
2/2008
• Initial Release
• Fixed several typos throughout document
• Changed Static Electrical Characteristics, Table 3, Digital Interface, OUT_EN Leakage
Current to VDD, maximum from 10 to 50μA.
4.0
• Reworded Table 15.
• Added Table 16 back (it was inadvertently deleted.
• Added “Ignition &” to tile in Table 4.
8/2008
• Updated package drawing.
5.0
6.0
• Parameter changes to Gate Drive Source Current, Spark Duration Comparator Threshold,
NOMI Trip Threshold Accuracy, MAXI Trip Point During Overlapping Dwell, Comparator
Hysteresis Voltage, Short to Battery Fault Detection Voltage Threshold, Output OFF Open
Load Detection Current, and Input Logic-voltage Hysteresis.
12/2008
• Made change to End of Spark Filter Time Select
• Changed orderable Part Number from PCZ33810EK/R2 to MCZ33810EK/R2 on Page 1.
• Revised Exposed Pad pin definition in Table 1, page 3.
• Changed Package outline drawing to 98ASA10556D.
• Changed introduction paragraph to Tables 3 and 4 from “9.0 V ≤ VPWR ≤ 18 V” to “6.0 V ≤
VPWR ≤ 32 V”
7/2010
7.0
•
Changed Gate Driver Parameters of VGS(ON) from 5.0 to 4.8.
7/2010
2/2011
• Changed Table 3 Characteristics from 18V to 32V for: IVPWR(SS), I(OFF)OCO and IFBX(FLT-SNS)
8.0
9.0
• Changed See Output OFF Open Load Detection Current on page 6 from 100 μA to 115 μA for
the maximum value.
• Corrected Table 13, End of Spark Filter Time Select.
4/2011
10.0
• Corrected Table 20, SPI Command Message Set and Default State (Command: End Spark
Filter).
33810
Analog Integrated Circuit Device Data
Freescale Semiconductor
36
FREESCALE [ Freescale ]
