Function Headers and Description
10.7.2 Echo_DisableRSSI
void Echo_DisableRSSI(void);
Syntax:
Parameters: None
Return:
None
Description: Turns off the RSSI module and disables the automatic reading of the RSSI during the
reception of a message.
Notes:
Requires Echo to be reset into configuration mode and thus will abort any transmission or
reception currently in progress. Status bit Busy is set during configuration.
10.8 Power and Sensitivity
10.8.1 Echo_SetRxSensitivity
void Echo_SetRxSensitivity(unsigned char level);
Syntax:
Parameters: level—sets the sensitivity to level in the range 0 to 3
Return:
None
Description: Sets the sensitivity of input stage where 0 is the most sensitive and 3 is the least sensitive.
Notes:
Requires Echo to be reset into configuration mode and thus aborts any transmission or
reception currently in progress. Status bit Busyis set during the configuration. The driver
sets up the working bank. If you have selected both banks, the driver sets up the register
in both banks.
10.8.2 Echo_SetTxPower
void Echo_SetTxPower(unsigned char level);
Syntax:
Parameters: level—sets the output power to level in the range 0 to 3
Return:
None
Description: Sets the power of output stage where 0 is the highest power to 3 the lowest power.
Notes:
Requires Echo to be reset into configuration mode and thus aborts any transmission or
reception currently in progress. Status bit Busyis set during the configuration. The driver
sets up the working bank. If you have selected both banks, the driver sets up the register
in both banks.
Software Drivers for MC33696, Rev. 1
26
Freescale Semiconductor
FREESCALE [ Freescale ]
