Freescale Semiconductor, Inc.
General Description
MCU Structure
• On-Chip H-Bridge Driver Circuitry to Drive Six Gauges
– Four Minor Gauges
– Two Major Gauges
• Mask Option Selectable Low-Voltage Reset (LVR)
• Power-Saving Stop Mode and Wait Mode Instructions (Mask
Option Selectable STOP Instruction Disable)
1.4 MCU Struc ture
The overall block diagram of the MC68HC05V12 is shown in
Figure 1-1.
NOTE: A line over a signal name indicates an active low signal. For example,
RESET is active high and RESET is active low. Any reference to voltage,
current, or frequency specified in the following sections will refer to the
nominal values. The exact values and their tolerance or limits are
specified in Section 17. Electrical Specifications.
1.5 Se le c ta b le Ma sk Op tions
The following mask options are selectable.
• Sensitivity on IRQ interrupt, edge- and level-sensitive or edge-
sensitive only
• Selectable COP watchdog system enable/disable
• Selectable low-voltage reset (LVR) to hold CPU in reset
• Selectable STOP instruction disable
MC68HC05V12 — Rev. 1.0
General Release Specification
General Description
For More Information On This Product,
Go to: www.freescale.com
FREESCALE [ Freescale ]
