MC33910BAC / MC34910BAC
FUNCTIONAL DESCRIPTION
FUNCTIONAL INTERNAL BLOCK DESCRIPTION
FUNCTIONAL INTERNAL BLOCK DESCRIPTION
MC33910 - Functional Block Diagram
Integrated Supply
Hall Sensor Supply
HVDD
Voltage Regulator
VDD
Analog Circuitry
Window Watchdog
Wake-Up
High Side Drivers
HS1 - HS2
Digital / Analog Input
LIN Physical Layer
Interface
Voltage & Temperature Sense
MCU Interface and Output Control
Reset & IRQ Logic
HS - PWM Control
Analog Output 0
Integrated Supply
Analog Circuitry
MCU Interface and Output Control
Drivers
Figure 35. Functional Internal Block Diagram
as over-current conditions in any of the driver stages can be
reported to the connected MCU via IRQ or RST. The High
Side driver outputs can be controlled via the SPI register as
well as the PWMIN input. The integrated LIN physical layer
interface can be configured via SPI register and its
communication is driven through the RXD and TXD device
pins. All internal analog sources are multiplexed to the
ADOUT0 pin.
ANALOG CIRCUITRY
The 33910 is designed to operate under automotive
operating conditions. A fully configurable window watchdog
circuit will reset the connected MCU in case of an overflow.
Two low power modes are available with several different
wake-up sources to reactivate the device. One analog / digital
input can be sensed or used as the wake-up source. The
device is capable of sensing the supply voltage (VSENSE)
and the internal chip temperature (CTEMP).
VOLTAGE REGULATOR OUTPUTS
Two independent voltage regulators are implemented on
the 33910. The VDD main regulator output is designed to
supply a MCU with a precise 5.0 V. The switchable HVDD
output is dedicated to supply small peripherals as hall
sensors.
HIGH SIDE DRIVERS
Two current and temperature protected High Side drivers
with PWM capability are provided to drive small loads such as
Status LED’s or small lamps. Both Drivers can be configured
for periodic sense during low power modes.
LIN PHYSICAL LAYER INTERFACE
MCU INTERFACE
The 33910 provides a LIN 2.0 compatible LIN physical
layer interface with selectable slew rate and various
diagnostic features.
The 33910 is providing its control and status information
through a standard 8-Bit SPI interface. Critical system events
such as Low- or High-voltage/Temperature conditions as well
33910
Analog Integrated Circuit Device Data
Freescale Semiconductor
68