Freescale Semiconductor
Technical Data
Document Number: MC33186
Rev. 7.0, 10/2011
H-Bridge Driver
The 33186 is a monolithic H-Bridge ideal for fractional horsepower
DC-motor and bi-directional thrust solenoid control. The IC
incorporates internal control logic, charge pump, gate drive, and low
R
DS(ON)
MOSFET output circuitry. The 33186 is able to control
continuous inductive DC load currents up to 5.0 A. Output loads can
be pulse width modulated (PWM-ed) at frequencies up to 10 kHz.
The 33186 is parametrically specified over a temperature range of
-40°C
≤
T
A
≤
125°C, 5.0 V
≤
V+
≤
28 V. The IC can also be operated
up to 40 V with de-rating of the specifications. The IC is available in a
surface mount power package with exposed pad for heat sinking.
Features
• Overtemperature, Short-Circuit Protection, and Overvoltage
Protection against Transients up to 40 V at VBAT Typical
• RDSon = 150 mΩ for each output Transistor at 25°C
• Continuous DC Load Current 5 A (TC < 100°C)
• Output Current Limitation at typ 6,5 A +/- 20%
• Short-Circuit Shutdown for Output Currents over 8 A
• Logic Inputs TTL/CMOS Compatible
• Operating Frequency up to 20 kHz
• Undervoltage Disable Function
• Diagnostic Output, 2 Disable Input
• Coding Input for Alternative Functions
• Stable Operation with an External Capacitance of Maximum 47
μF
at VBAT
• Pb-Free Packaging Designated by Suffix Code VW
DH SUFFIX
VW SUFFIX (PB-FREE)
PLASTIC PACKAGE
98ASH70702A
20-PIN HSOP
33186
H-BRIDGE MOTOR DRIVER
ORDERING INFORMATION
Device
MC33186DH1/R2
- 40°C to 125°C
MC33186VW1/R2
20 HSOP
Temperature
Range (T
A
)
Package
5.0 V
CP
33186
VBAT
OUT1
VPWR
SF
MCU
or
DSP
IN1
IN2
DI1
DI2
MOTOR
OUT2
PGND
Figure 1. 33186 Simplified Block Diagram
*This document contains certain information on a product under development. Fre-
escale reserves the right to change or discontinue this product without notice
© Freescale Semiconductor, Inc., 2007 - 2011. All rights reserved.