Feature Integration Technology Inc.
Fintek
F75373
6.38
FAN2 full speed Register 1 Index 81h
Power on default: 1111_1111b
Bit Name
Attribute
Description
7-0 FAN2_FULL
(LSB)
R/W
While PIN4 is set to PWMOUT mode, the PWMOUT2 will output full
duty cycle (FFh) to enable system FAN. After 15 seconds, assuming
the fan has been fully turned on, the fan speed count detected will be
recorded in the register.
6.39
FAN2 expect timeout speed Register Index 82h
Power on default: 0000_0001b
Bit Name
7-0 FAN2_TSPEED
Attribute
Description
R/W
The fan2 timeout count, when software idle timeout is happen, this
count will be load to FAN1 expect register. The default count is 11/8
of FAN2_FULL reg. ( 73% of full speed).
This register is only valid at HALF-AUTOMATIC(SPEED) mode.
6.40
FAN2 expect timeout speed Register Index 83h
Power on default: 0101_1101b
Bit Name
Attribute
Description
7-0 FAN2_TSPEED
(LSB)
R/W
The fan2 timeout count, when software idle timeout is happen, this
count will be load to FAN2 expect register. The default count is 11/8
of FAN2_FULL reg. ( 73% of full speed).
This register is only valid at HALF-AUTOMATIC(SPEED) mode.
6.41
FAN2 expect count Register-- Index 84h
Power on default [7:0] = 0000_0001b
Bit Name
Description
Attribute
28
V0.25P