F71869A
2. Feature List
General Functions
¾Comply with LPC Spec. 1.0
¾Support DPM (Device Power Management), ACPI
¾Support AMD power sequence controller
¾Provides one FDC, two UARTs, Hardware KBC and Parallel Port
¾H/W monitor functions
¾Support AMD TSI Interface, Intel PECI 3.0 interface, Intel Block Read/Write SMBus Interface
¾Support CIR with RC6 and SMK QP protocols
¾Support Intel Cougar Point Timing
¾58 GPIO Pins for flexible application
¾24/48 MHz clock input
¾Packaged in 128-LQFP and powered by 3.3VCC
FDC
¾Compatible with IBM PC AT disk drive systems
¾Variable write pre-compensation with track selectable capability
¾Support vertical recording format
¾DMA enable logic
¾16-byte data FIFOs
¾Support floppy disk drives and tape drives
¾Detects all overrun and under run conditions
¾Built-in address mark detection circuit to simplify the read electronics
¾Completely compatible with industry standard 82077
¾360K/720K/1.2M/1.44M/2.88M format; 250K, 300K, 500K, 1M, 2M bps data transfer rate
UART
¾Two high-speed 16C550 compatible UART with 16-byte FIFOs
¾Fully programmable serial-interface characteristics
¾Baud rate up to 115.2K
¾Support IRQ sharing
¾Support Ring-In Wakeup
Infrared
¾Support IrDA version 1.0 SIR protocol with maximum baud rate up to 115.2K bps
7
Oct., 2011
V0.19P
FINTEK [ FEATURE INTEGRATION TECHNOLOGY INC. ]
