FWDM-1621-7D-xx SFP Product Specification – September 2005
V.
Optical Characteristics (TOP = 0 to 70 °C, VCC = 3.15 to 3.60 Volts)
Parameter
Symbol
Min
Typ
Max
Unit
Ref.
Transmitter
Output Opt. Pwr (EOL)
Optical Wavelength
Wavelength Temperature Dependence
Spectral Width
Optical Extinction Ratio
Sidemode Suppression ratio
Optical Rise/Fall Time
RIN
Transmitter Jitter Generation
Dispersion Penalty at 80 km
Receiver
POUT
l
0
+5
(X+6.5)
0.125
1
dBm
nm
nm/°C
nm
dB
dB
2
3
(X-6.5)
(X+1)
0.08
4
5
Dl 20
ER
SMSRmin
tr/ tf
8.2
30
180
-120
75
ps
6
RIN
dB/Hz
mUI
dB
7
8
2.5
Optical Input Power
Pin
l C
-28
1450
-9
1620
75
dBm
nm
mUI
dB
9
7
Optical Input Wavelength
Receiver Jitter Generation
Optical Return Loss
27
Notes:
1. Parameters are specified over temperature and voltage, at end of life unless otherwise noted.
2. Class 1 Laser Safety per FDA/CDRH and IEC-825-1 regulations.
3. Over case temperature of 0 to 70 °C. The Transmitter Center Wavelength “X” is as specified by the
customer. The current available wavelengths are: 1470, 1490, 1510, 1530, 1550, 1570, 1590, and 1610
nm. Please see the “Product Selection” section on page 1.
4. Full width, -20dB from peak.
5. Measured filtered, at 2.488 Gb/s. Min represents worst-case ER over temperature and at end of life.
6. Unfiltered, 20% to 80%.
7. Measured per GR-2532 section 5.6 for OC-48 B.
8. SMF-28 fiber used. 80kms represents 1600ps/nm at 1610nm. Measured at 2.488Gb/s with a PRBS
223-1 pattern at a BER<10-12.
9. Pin represents the range of input powers where BER<10-12. Pin is valid over all data rates specified in
Section IV.
Ó Finisar Corporation September 2005 Rev. F
Page 5