FTR-1621T-XX WDM GBIC
Product Specification – December 2004
Finisar
X.
1.
References
“Gigabit Interface Converter (GBIC) Revision 5.5”.
(*)
Sun Microsystems Computer
Company et. al., August 16, 1999.
http://playground.sun.com/pub/OEmod/
IEEE Std 802.3. IEEE Standards Department, 2000.
“Fibre Channel Physical and Signaling Interface (FC-PH, FC-PH2, FC-PH3)”.
American National Standard for Information Systems.
“SONET Transport Systems: Common Generic Criteria”, Telcordia Technologies,
GR-253-CORE, Issue 3, Sept 2000
“Application Note AN-2030: Digital Diagnostic Monitoring Interface
for Optical Transceivers”, Finisar Corporation, April 2002.
“AT24C01A/02/04/08/16 2-Wire Serial CMOS E
2
PROM”. Atmel Corporation.
www.Atmel.com
2.
3.
4.
5.
6.
(*) Neither GBIC, FC-PH, nor IEEE802.3 specifies a 14xx/15xx/16xx nm single mode
interface. The FTR-1621T-XX complies with these specifications except for the
following optical parameters: laser wavelength, receiver sensitivity, and transmit output
power. See Table 6 for details.
(**) The FTR-1621T-XX optical interface is not fully SONET/SDH compliant. Please see
Table 6.
XI. For More Information
Finisar Corporation
1308 Moffett Park Drive
Sunnyvale, CA 94089-1133
Tel. (408) 548-1000
Fax (408) 541-6138
sales@finisar.com
www.finisar.com
© Finisar Corporation December 2004 Rev E
Page 8
FINISAR [ FINISAR CORPORATION. ]
