FTR-1419 40km Extended GBIC Product Specification – November 2007
X.
References
1. “Gigabit Interface Converter (GBIC) Revision 5.4”. Sun Microsystems Computer
Company et al., August 16, 1999. http://playground.sun.com/pub/OEmod/
2. IEEE Std 802.3, 2000 Edition. IEEE Standards Department, 2000.
3. “Fibre Channel Draft Physical Interface Specification (FC-PI 10.0)”. American
National Standard for Information Systems.
4. “Application Note AN-2025: Using the Built in Test/Diagnostics Port”. Finisar
Corporation, September 1998. www.finisar.com
5. “AT24C01A/02/04/08/16 2-Wire Serial CMOS E
2
PROM”. Atmel Corporation.
* The GBIC Standard, FC-PI and IEEE 802.3 do not specify a 1310nm single-mode
interface for 40km applications. The FTR-1419 complies with these standards except for
the following optical parameters: extinction ratio, receiver sensitivity and transmit output
power. See Table 6 for details.
XII. For More Information
Finisar Corporation
1308 Moffett Park Drive
Sunnyvale, CA 94089-1133
Tel. 1-408-548-1000
Fax 1-408-541-6138
©
Finisar Corporation November 16, 2007 Rev.G1
Page 9