FTLX8551 Product Specification – November 2007
VI. Regulatory Compliance
Feature
ESD:
Electrostatic Discharge to the
Electrical Pins (HBM)
Immunity:
Against Electrostatic Discharge
(ESD) to the Module Receptacle
Immunity:
Against Radio Frequency
Electromagnetic Field
Emission:
Electromagnetic Interference
(EMI)
Standard
EIA/JESD22-A114-B
(MIL-STD 883D
Method 3015.7)
EN 61000-4-2
IEC 61000-4-2
Comments
Class 1a (> 500 V)
Discharges ranging from
±
2 kV to
±
15 kV to
the front end / faceplate / receptacle cause no
damage to module (under recommended
conditions).
With a field strength of 10 V/m, noise
frequency ranges from 10 MHz to 2 GHz. No
effect on module performance between the
specification limits.
Noise frequency range:
30 MHz to 40 GHz
Radiated emission does not exceed specified
limits when measured with module inside a
shielding enclosure with MSA conform cutout.
EN 55022
EN 55024
This device complies with part 15 of the FCC
Class B Rules
1)
. Operation is subject to the
following two conditions:
1. This device may not cause harmful
interference.
2. This device must accept any interference
received, including interference that may
cause undesired operation.
3. Must be used in a system housing.
EN 61000-4-3
IEC 61000-4-3
FCC 47 CFR
Part 15, Class B
EN 55022 Class B
CISPR 22
Compliant with
89/336/EEC
FCC:
Eye Safety
Finisar FTLX8551 transponders are Class 1 Laser Products. They are certified per the
following standards:
Feature
Agency
Standard
Certificate
Number
Laser Eye FDA/CDRH CDRH 21 CFR 1040 and Laser Notice
9210176-77
Safety
50
Laser Eye
TÜV
EN 60825-1: 1994+A11:1996+A2:2001 R 72052602
Safety
IEC 60825-1: 1993+A1:1997+A2:2001
IEC 60825-2: 2000, Edition 2
Electrical
TÜV
EN 60950
R 72052602
Safety
Electrical
UL/CSA
CLASS 3862.07
1439230
Safety
CLASS 3862.87
Copies of the referenced certificates will be available at Finisar Corporation upon request.
©
Finisar Corporation – November 2007 Rev. B
Page 9
FINISAR [ FINISAR CORPORATION. ]
