FTLF1621P2xTL Pluggable SFP Product Specification – January 2006
V.
General Specifications
Parameter
Symbol
BR
BER
L
MAX1
L
MAX2
L
MAX3
L
MAX4
L
MAX5
Min
155
Typ
Max
2667
10
-12
Units
Mb/s
km
km
km
km
km
Ref.
1
2
3
3
3
3
3
Data Rate
Bit Error Rate
Max. Supported Link Length on
9/125µm SMF @ OC-48
Max. Supported Link Length on
9/125µm SMF @ 2X Fibre Channel
Max. Supported Link Length on
9/125µm SMF @ Gigabit Ethernet
Max. Supported Link Length on
9/125µm SMF @ OC-12
Max. Supported Link Length on
9/125µm SMF @ OC-3
80
85
100
100
100
Notes:
1. SONET OC-48 LR-2/SDH STM L-16.2, Gigabit Ethernet and 1X/2X Fibre Channel compliant.
Compatible with SONET OC-12 and OC-3. Supports FEC at 2.67Gb/s.
2. Tested with a PRBS 2
31
-1 test pattern interspersed with 72 consecutive ones and 72 consecutive zeros
unless otherwise specified.
3. Attenuation of 0.275 dB/km is used for the link length calculations (per GR-253 CORE). A 2dB
penalty is included for dispersion on >2Gb/s data rates. Distances are indicative only. Please refer to
the Optical Specifications in Table IV to calculate a more accurate link budget based on specific
conditions in your application.
VI.
Environmental Specifications
Finisar SFP transceivers have an industrial operating temperature range from -40°C to
+85°C case temperature.
Parameter
Case Operating Temperature
Storage Temperature
Symbol
T
op
T
sto
Min
-40
-40
Typ
Max
85
85
Units
°C
°C
Ref.
VII.
Regulatory Compliance
Finisar transceivers are Class 1 Laser Products and comply with US FDA regulations.
These products are certified by TÜV and CSA to meet the Class 1 eye safety
requirements of EN (IEC) 60825 and the electrical safety requirements of
EN (IEC) 60950. Copies of certificates are available at Finisar Corporation upon request.
Finisar Corporation January 20, 2006 Rev.A
Page 5
FINISAR [ FINISAR CORPORATION. ]
