FTLF1521P1xCL Pluggable SFP Product Specification – August 2006
Finisar
V.
General Specifications
Parameter
Symbol
BR
BER
L
MAX1
L
MAX2
L
MAX3
L
MAX4
L
MAX5
Min
155
Typ
Max
2667
10
-12
Units
Ref.
Mb/sec 1
2
km
3
km
km
km
km
4
5
5
5
Data Rate
Bit Error Rate
Max. Supported Link Length on
9/125μm SMF @ OC-48
Max. Supported Link Length on
9/125μm SMF @ 2X Fibre Channel
Max. Supported Link Length on
9/125μm SMF @ Gigabit Ethernet
Max. Supported Link Length on
9/125μm SMF @ OC-12
Max. Supported Link Length on
9/125μm SMF @ OC-3
15
50
60
60
60
Notes:
1. SONET OC-48 IR-2/SDH STM S-16.2, Gigabit Ethernet and 1x/2x Fibre Channel compliant.
Compatible with SONET OC-12 and OC-3. Supports FEC at 2.67Gb/s.
2. Tested with a PRBS 2
31
-1 test pattern interspersed with 72 consecutive ones and 72 consecutive zeros.
3. Target distances are specified per ITU G.957. A 1dB penalty is included for dispersion. Distances are
indicative only. Please refer to the Optical Specifications in Table IV to calculate a more accurate link
budget based on specific conditions in your application.
4. Attenuation of 0.275 dB/km is used for the link length calculations (per GR-253 CORE). A 2dB
penalty is included is included for dispersion. Distances are indicative only. Please refer to the
Optical Specifications in Table IV to calculate a more accurate link budget based on specific
conditions in your application.
5. Attenuation of 0.275 dB/km is used for the link length calculations (per GR-253 CORE). Distances
are indicative only. Please refer to the Optical Specifications in Table IV to calculate a more accurate
link budget based on specific conditions in your application.
VI.
Environmental Specifications
Finisar SFP transceivers have an extended operating temperature range from 0°C to
+70°C case temperature.
Parameter
Case Operating Temperature
Storage Temperature
Symbol
T
op
T
sto
Min
0
-40
Typ
Max
70
85
Units
°C
°C
Ref.
VII.
Regulatory Compliance
Finisar transceivers are Class 1 Laser Products and comply with US FDA regulations.
These products are certified by TÜV and CSA to meet the Class 1 eye safety
requirements of EN (IEC) 60825 and the electrical safety requirements of
EN (IEC) 60950. Copies of certificates are available at Finisar Corporation upon request.
©
Finisar Corporation August 7, 2006 RevA
Page 5
FINISAR [ FINISAR CORPORATION. ]
