FTLF1322P1xTR Pluggable SFP Product Specification - December 2005
Finisar
V.
General Specifications
Parameter
Symbol
BR
BER
L
MAX4
Min
155
Typ
Max
622
10
-12
Units
Ref.
Mb/sec 1
2
km
3
Data Rate
Bit Error Rate
Max. Supported Link Length on
9/125µm SMF @ OC-12
15
Notes:
1. Compliant with SONET and SDH standards at OC-12 IR-1/STM S-4.1 and OC-12 SR/STM I-4. In
addition, they comply with SONET and SDH standards at OC-3 IR-1 /STM S-1.1 and OC-3 SR/STM
I-1, as detailed in Finisar Application Note AN-2042.
2. Tested with a PRBS 2
23
-1 test pattern.
3.
Attenuation of 0.55 dB/km is used for the link length calculations (per GR-253 CORE). Distances are
indicative only. Please refer to the Optical Specifications in Table IV to calculate a more accurate link
budget based on specific conditions in your application.
VI.
Environmental Specifications
Finisar 1310nm SFP transceivers have an industrial operating temperature range from
–40°C to +85°C case temperature.
Parameter
Case Operating Temperature
Storage Temperature
Symbol
T
op
T
sto
Min
-40
-40
Typ
Max
85
100
Units
°C
°C
Ref.
VII.
Regulatory Compliance
Finisar transceivers are Class 1 Laser Products and comply with US FDA regulations.
These products are certified by TÜV and CSA to meet the Class 1 eye safety
requirements of EN (IEC) 60825 and the electrical safety requirements of
EN (IEC) 60950. Copies of certificates are available at Finisar Corporation upon request.
Finisar Corporation December 2, 2005 Rev.A
Page 5