FTL-1621-XX CWDM GBIC
Product Specification – February 2007
Finisar
X.
References
1. IEEE Std 802.3, 2000 Edition, Clause 38. IEEE Standards Department, 2000.
2. “Fibre Channel Physical and Signaling Interface (FC-PH, FC-PH2, FC-PH3)”.
American National Standard for Information Systems.
3. “Gigabit Interface Converter (GBIC) Revision 5.5”. (*) Sun Microsystems Computer
Company et. al., August 16, 1999.http://playground.sun.com/pub/OEmod/
4. Directive 2002/95/EC of the European Council Parliament and of the Council, “on the
restriction of the use of certain hazardous substances in electrical and electronic
equipment.” January 27, 2003.
5. “Application Note AN-2038: Finisar Implementation Of RoHS Compliant
Transceivers”, Finisar Corporation, January 21, 2005.
6. “Application Note AN-2030: Digital Diagnostic Monitoring Interface for SFP Optical
Transceivers”, Finisar Corporation, April 2002.
7. “AT24C01A/02/04/08/16 2-Wire Serial CMOS E
2
PROM”. Atmel Corporation.
www.Atmel.com
(*) Neither GBIC, FC-PH, nor IEEE802.3 specifies a 14xx/15xx/16xx nm single mode
interface. The FTL-1621-XX complies with these specifications except for the following
optical parameters: laser wavelength, receiver sensitivity, and transmit output power. See
Table 6 for details.
XI. For More Information
Finisar Corporation
1308 Moffett Park Drive
Sunnyvale, CA 94089-1133
Tel. (408) 548-1000
Fax (408) 541-6138
sales@finisar.com
www.finisar.com
© Finisar Corporation February 2007 Rev.B
Page 9