DM80-02-0/1/2 CML
TM
TOSA Product Specification – May 2007
Finisar
Electro-Static Discharge (ESD)
The device meets the ESD Class 3 requirements of the Telcordia standard TR-NWT-
000870 Issue 1, dated February 1991.
VIII. Order Information
Product code
For the product specified in this document, the proper product code shall be:
DM80-02-1 (or, -0, -2)-xxxx-3-RC-yyyy
This product code should be specified when placing a purchase order.
•
•
“01” indicates a butterfly box module as specified in this document.
“1” indicates the laser wavelength will be specified on 100GHz ITU grid as
specified in Table 9 and Table 10. If –“0” is specified, it can be a TDM version
with any wavelength within C or L band, but not guaranteed on ITU grids. –“2”
can also be specified for 50GHz ITU grid.
“xxxx” is the channel ID as specified in Table 9 and Table 10.
“3” indicates modulated output power range is between 4-7dBm. Please contact
Finisar if different power level is needed.
“RC” indicates the optical connector type is a receptable, currently an LC
receptable. If other type connector is required, please contact Finisar.
“yyyy” indicates any special customized request and need to be agreed with
Finisar prior to ordering
•
•
•
•
IX. Revision History
Revision
A
Date
5-May-2007
•
•
•
•
•
•
•
•
•
Document created.
Description
©
Finisar Corporation –10-May-07
Rev_A
Page 9