Zero Crossing Characteristics (T = 25°C Unless otherwise specified.)
A
Characteristics
Test Conditions
Symbol Device Min Typ Max Units
Inhibit Voltage
I = rated I , MT1-MT2 voltage
V
IH
All
20
V
F
FT
above which device will not trigger
off-state
Leakage in Inhibited State I = rated I , rated V
, off-state
I
DRM2
All
500
µA
F
F
DRM
Note
1. Test voltage must be applied within dv/dt rating.
2. All devices are guaranteed to trigger at an IF value less than or equal to max IFT. Therefore, recommended operating IF lies between max IFT
(15 mA for MOC3031M & MOC3041M, 10 mA for MOC3032M & MOC3042M, 5 mA for MOC3033M & MOC3043M) and absolute max IF (60 mA).
3. This is static dv/dt. See Figure 9 for test circuit. Commutating dv/dt is a function of the load-driving thyristor(s) only.
3
www.fairchildsemi.com
MOC3031M, MOC3032M, MOC3033M, MOC3041M, MOC3042M, MOC3043M Rev. 1.0.1
FAIRCHILD [ FAIRCHILD SEMICONDUCTOR ]
