XRT83SL28
xr
8-CHANNEL E1 SHORT-HAUL LINE INTERFACE UNIT
REV. 1.0.0
CHANNEL CONTROL REGISTER (0X07H, 0X0BH, 0X0FH, 0X13H, 0X17H, 0X1BH, 0X1FH, 0X23H)
Register
Type
Default
Value
BIT
NAME
FUNCTION
(HW reset)
D3
RLOSS_n Receiver Loss of Signal Alarm Status
RO
0
The receiver loss of signal detection is always active regardless if
the interrupt generation is disabled. This bit indicates the RLOS
activity. An interrupt will not occur unless the RLOSIE is set to "1"
in the channel register 0x04h and GIE is set to "1" in the global
register 0xE0h.
"0" = No Alarm
"1" = An RLOS condition is present
D2
D1
D0
Reserved This Register Bit is Not Used
Reserved This Register Bit is Not Used
Reserved This Register Bit is Not Used
R/W
R/W
R/W
X
X
X
40
EXAR [ EXAR CORPORATION ]
