MP7533
ABSOLUTE MAXIMUM RATINGS (T
A
= +25
°
C unless otherwise noted)
1, 2
V
DD
to GND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +17 V
Digital Input Voltage to GND . . . . GND –0.5 to V
DD
+0.5 V
I
OUT1
, I
OUT2
to GND . . . . . . . . . . . . . . . . –0.5 to V
DD
+0.5 V
V
REF
to GND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +25 V
V
RFB
to GND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +25 V
Storage Temperature . . . . . . . . . . . . . . . . . –65
°
C to +150
°
C
Lead Temperature (Soldering, 10 seconds) . . . . . . +300
°
C
Package Power Dissipation Rating to 75
°
C
CDIP, PDIP, SOIC, PLCC . . . . . . . . . . . . . . . . . . 700mW
Derates above 75
°
C . . . . . . . . . . . . . . . . . . . . . 10mW/
°
C
NOTES:
1
Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. This is a
stress rating only and functional operation at or above this specification is not implied. Exposure to maximum rating
conditions for extended periods may affect device reliability.
2
Any input pin which can see a value outside the absolute maximum ratings should be protected by Schottky diode clamps
(HP5082-2835) from input pin to the supplies.
All inputs have protection diodes
which will protect the device from short
transients outside the supplies of less than 20mA for less than 100
µ
s.
APPLICATION NOTES
Refer to Section 8 for Applications Information
Rev. 2.00
4
EXAR [ EXAR CORPORATION ]
