8 PIN DIP HIGH SPEED 10MBit/s LOGIC GATE
PHOTOCOUPLER
6N137
EL26XX series
Notes:
*3 The VCC supply must be bypassed by a 0.1µF capacitor or larger. This can be either a ceramic or solid
tantalum capacitor with good high frequency characteristic and should be connected as close as possible to
the package VCC and GND pins
*4. Enable Input – No pull up resistor required as the device has an internal pull up resistor.
*5. tPLH
Propagation delay is measured from the 3.75mA level on the HIGH to LOW transition of the input
current pulse to the 1.5 V level on the LOW to HIGH transition of the output voltage pulse.
*6. tPHL
Propagation delay is measured from the 3.75mA level on the LOW to HIGH transition of the input
current pulse to the 1.5 V level on the HIGH to LOW transition of the output voltage pulse.
*7. tr
Rise time is measured from the 90% to the 10% levels on the LOW to HIGH transition of the output
pulse.
*8. tf
Fall time is measured from the 10% to the 90% levels on the HIGH to LOW transition of the output
pulse.
*9. tELH
Enable input propagation delay is measured from the 1.5V level on the HIGH to LOW transition of
the input voltage pulse to the 1.5V level on the LOW to HIGH transition of the output voltage pulse.
Enable input propagation delay is measured from the 1.5V level on the LOW to HIGH transition of
*10. tEHL
the input voltage pulse to the 1.5V level on the HIGH to LOW transition of the output voltage pulse.
*11 CMH– The maximum tolerable rate of rise of the common mode voltage to ensure the output will remain in
the HIGH state (i.e., VOUT > 2.0V).
*12 CML– The maximum tolerable rate of rise of the common mode voltage to ensure the output will remain in
the LOW output state (i.e., VOUT < 0.8V).
Order Information
Part Number
6N137Y(Z)-V
Or
EL26XXY(Z)-V
Note
X
Y
Z
V
= (01 or 11) for EL26 part no.
= Lead form option (S, S1, M or none)
= Tape and reel option (TA, TB or none).
= VDE (optional)
Option
None
M
S (TA)
S (TB)
S1 (TA)
S1 (TB)
Standard DIP-8
Everlight Electronics Co., Ltd.
Document No DPC-0000120 Rev. 2
：
–
–
–
–
–
–
Description
Packing quantity
45 units per tube
45 units per tube
1000 units per reel
1000 units per reel
1000 units per reel
1000 units per reel
Wide lead bend (0.4 inch spacing)
Surface mount lead form + TA tape & reel option
Surface mount lead form + TB tape & reel option
Surface mount lead form (low profile) + TA tape & reel option
Surface mount lead form (low profile) + TB tape & reel option
9
http://www.everlight.com
November 2, 2011
EVERLIGHT [ EVERLIGHT ELECTRONICS CO., LTD ]
