Technical Data Sheet
3mm POWER LED
30-01/G4C-ARTB
Notes
1. Above specification may be changed without notice. EVERLIGHT will reserve authority on
material change for above specification.
2. When using this product, please observe the absolute maximum ratings and the instructions for
using outlined in these specification sheets. EVERLIGHT assumes no responsibility for any
damage resulting from use of the product which does not comply with the absolute maximum
ratings and the instructions included in these specification sheets.
3. These specification sheets include materials protected under copyright of EVERLIGHT
corporation. Please don’t reproduce or cause anyone to reproduce them without EVERLIGHT’s
consent.
4. Below the zener reference voltage Vz, all the current flows through LED and as the voltage rises
to Vz, the zener diode “breakdown." If the voltage tries to rise above Vz current flows through
the zener branch to keep the voltage at exactly Vz.
5. When the LED is connected using serial circuit, if either piece of LED is no light up but current
can’t flow through causing others to light down. In new design, the LED is parallel with zener
diode. if either piece of LED is no light up but current can flow through causing others to light.
Everlight Electronics Co., Ltd.
Device number: DLE-300-098
http:\\www.everlight.com
Rev.1
Page: 6 of 7
Established date: 04-30-2007
Established by: Jim Lin
EVERLIGHT [ EVERLIGHT ELECTRONICS CO., LTD ]
