EVERLIGHT ELECTRONICS CO.,LTD.
15-21/T1D-CP1Q2TY/2T
5.Repairing
Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a
double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether
the characteristics of the LEDs will or will not be damaged by repairing.
EVERLIGHT ELECTRONICS CO., LTD.
Office: No 25, Lane 76, Sec 3, Chung Yang Rd,
Tucheng, Taipei 236, Taiwan, R.O.C
Tel: 886-2-2267-2000, 2267-9936
Fax: 886-2267-6244, 2267-6189, 2267-6306
http://www.everlight.com
Everlight Electronics Co., Ltd.
http://www.everlight.com
Prepared date: 28-Dec-2006
Rev 1
Page: 12 of 12
Revision : 1
Release Date:2008-09-20 00:16:10.0
Device No:SZDSE-151-T06
Prepared by: Linlin wu
LifecyclePhase:
Expired Period: Forever
EVERLIGHT [ EVERLIGHT ELECTRONICS CO., LTD ]
